• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure  3-1.  R.O.  Vessel  End  Cap  Assembly  Removal
Figure   3-4.   Pulling   Element   From   R.O.   Vessel

TM-10-4610-215-10 Water Purification Unit Reverse Osmosis 600 GPH Trailer Mounted Flatbed Cargo 5 Ton 4 Wheel Tandem Rowpu Model 600-1 Manual
Page Navigation
  136    137    138    139    140  141  142    143    144    145    146  
TM  10-4610-215-10 TM  08580A-10/1 LEGEND: 1. Puller   Rod 2.   Puller   Rod   Handle Figure   3-2.   R.O.   Vessel   Element   Puller LEGEND: 1.   Element   Puller   (Assembled) 5. Interconnector 2.   R.O.   Vessel 6. Element   Puller   Plate 3.   End   Connector 7. Flat   Washer 4.   R.O.   Elements 8. Nut Figure   3-3.   R.O.   Vessel   Element   Puller   Assembly CAUTION If possible, remove elements in direction of flow. Because of obstruction by generator, elements for Army ModeI 600–1 must be removed and installed from trailer hitch end. MC Model 600–3 users should remove elements from chemical feed pump end and install from R.O. pump end. (2) Refer now to fig. 3-3. From the front of the ROWPU, insert element puller (1) into R.O. vessel (2). Push puller through end connector (3), through the product water tubes of the two R.O. elements (4), and through the interconnector (5) between the two R.O. elements. (3) Place element puller plate (6) on assembled element puller (1) and secure with flat washer (7) and nut (8). 3-20







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.