• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure  2-26.  Typical  Water  Tank  Installation
Figure  2-28.  Backwash   Pump   And   Strainer

TM-10-4610-215-10 Water Purification Unit Reverse Osmosis 600 GPH Trailer Mounted Flatbed Cargo 5 Ton 4 Wheel Tandem Rowpu Model 600-1 Manual
Page Navigation
  53    54    55    56    57  58  59    60    61    62    63  
TM    10-4610-215-10 TM   08580A-10/1 Figure   2–27.   Raw   Water   System p. Install the backwash strainer onto the backwash pump frame (fig. 2-31). (1) (2) (3) (4) (5) (6) (7) Remove straps securing strainer to backwash pump. Remove the two mounting bolts, nuts, and washers from the backwash strainer bracket. Remove caps from strainer and pump outlets. Attach strainer inlet connection to swivel connector on backwash pump. Place backwash strainer bracket against the frame and line up the holes. Insert two bolts into mounting holes, placing washers and nuts as required. Tighten all connections. 2 - 40







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.