2-8. SHUTDOWN (CONT)
Flip boost pump control switch down. Engine will stop.
Flip raw water pump control switch down. Engine will stop. Shutdown is now completed.
2-9. PREPARATION FOR MOVEMENT
Shut down system (para 2-8).
Remove control box cable from socket on high pressure pump. Store cable on pretreatment assembly.
Remove filler cap and feeder tube from each 55-gallon chemical drum. Store on pretreatment assembly.
Install cover caps on each 55-gallon chemical drum.
Disconnect any auxiliary fuel tanks.
Disconnect all hoses.
Remove cartridge filter elements (para 3-5) and discard.
Reverse osmosis membrane elements must be packed within a short time after removal to prevent
damage from dehydration. Organizational maintenance is responsible for packing elements and
must be notified before they are removed from pressure tubes.
Remove elements from pressure tubes (para 3-9).
To put back in operation, refer to para 2-4 and para 2-5.