TM 10-4610-229-10
2-4. ASSEMBLY AND PREPARATION FOR USE (CONT)
c.
Unpackaging
1
Remove crate bolts.
CAUTION
Remove sides of crate carefully to prevent damage which would prevent later use of crate.
2
Gently pry nailed sides of crate apart. When possible, tap gently on inside of crate to remove sides.
3
Follow lifting instructions on decals on skids and equipment. Using a suitable lifting device, lift
equipment away from bottom of crate. Set crates aside for later use.
d.
Tools Required for ROWPU Assembly. Tools that are required to assemble and install ROWPU are listed
below. Before assembly operation begins, all tools should be located and inspected for damage. Report missing or
damaged tools to your supervisor.
Tool
Use
Crowfoot wrench/extension
Install rigid tubes and flex tubes on
(item 6, appendix B,
reverse osmosis block assembly
Section III)
Element removal tool
Install and remove osmosis elements
(appendix C)
Prybar
Disassemble packing crates
(appendix C)
Spanner wrench
Install hoses with threaded fittings
(item 8, appendix B,
Section III)
Wrench set
Remove bolts from crates; install
(appendix C)
grooved pipe couplings; and vent raw
water pump and boost pump engines
2-69