TM 10-4610-229-10
2-4. ASSEMBLY AND PREPARATION FOR USE (CONT)
24
Repeat steps 20 through 23 for scale inhibitor drum and scale inhibitor pump.
25
Attach 3 in. x 20 ft canvas hose to pretreatment outlet C-4.
26
Attach other end of canvas hose to high pressure pump inlet C-5.
NOTE
It may be necessary to loosen 2 in. grooved pipe coupling to remove C-6 grooved pipe coupling.
27
Remove two nuts, two bolts, coupling halves, and gasket on C-6 grooved pipe coupling. Remove cap
and set on skid.
2-76