2-39. SKID -MOUNTED BOOST PUMP ASSEMBLY REPLACEMENT (CONT)
Remove drain plug and drain fuel. Install drain plug.
Open cam arms. Remove suction hose from pump inlet.
Following directions on skid, use suitable lifting device to remove pump assembly.
Following directions on skid, use suitable lifting device to install pump assembly.
Install diffuser and discharge hose (para 2-42).
Install suction hose on pump inlet. Close cam arms.
Fill engine with fuel. (See TM 10-4610-229-10.)
2-40. WIRING HARNESS REPLACEMENT/REPAIR
This task covers replacement and repair.
Boost Pump Assembly
Solder, item 31, appendix C
Tags, item 34, appendix C
General Mechanic's Automotive
Tool Kit, item 10, appendix B
Common No. 1 Organizational
Maintenance and Repair Shop
Equipment, item 11, appendix B