2-66. SKID-MOUNTED PRETREATMENT ASSEMBLY REPAIR (CONT)
Install pipe on T-pipe.
Install two nipples on pretreatment assembly on inlet and outlet side of ball valve V-4.
Install ball valve V-4 (subpara c).
Install five reducer bushings on T-pipe.
Install T-pipe on nipple.
Install temperature gage well adapter and pipe on T-pipe.
Install flowmeter T-pipe on nipple.
Install flowmeter adapter and pipe on T-pipe.
Install two nipples and T-pipe.
Install elbow, nipple, and dust cap.
Install lanyard, two nuts, and screw on dust cap.
Install tubing on pipe as required.
Install safety relief valve (subpara b).
Install temperature gage and flowmeter (para 2-67).
2-67. FLOWMETER (FI-1)/TEMPERATURE GAGE (TI-1) REPLACEMENT
This task covers:
General Mechanic's Automotive Tool
Kit, item 10, appendix B