2-68. CARTRIDGE FILTER ASSEMBLY REPLACEMENT/REPAIR (CONT)
c. Casing Removal and Disassembly
Remove cage assembly (subpara a).
Remove reducer from top assembly.
Remove filter disc. Remove and discard O-ring.
Remove two capscrews. Remove end plate.
Place T-pipe in a vise.
Remove elbow and T-plug.
Remove elbow assembly, conduit locknut, bracket, and pipe nipple from T-pipe.
Remove T-pipe from vise.
Remove screw, lanyard, and two nuts from dust cap. Remove screw, lanyard, nut, and
flatwasher from bracket.
Remove dust cap and pipe nipple from elbow.