TM 10-4610-229-24
2-87. CONTROL PANEL ASSEMBLY REPLACEENT/BREPAIR (CONT)
4
Install start switch. Install lockwasher, plate, and retaining nut.
5
Connect two wires. Remove tags.
6
Install switch knob. Install lockwasher and screw.
b. KILL START Lever Replacement
1
Remove cotter pin. Remove clevis pin from clevis and cable link.
2
Remove clevis and nut from KILL START lever rod.
3
Pull KILL START lever rod from control panel. Remove spring.
4
Insert KILL START lever rod through spring and control panel.
5
Install nut and clevis.
NOTE
Hole in clevis should aline with hole in KILL START lever with no movement of lever.
6
Insert clevis pin through cable link and clevis.
7
Insert cotter pin in clevis pin. Bend pin.
2-226