2-93. FUEL FILTER ASSEMBLY REPLACEMENT/REPAIR (CONT)
c. Base Removal
Loosen line nut. Disconnect fuel line.
Loosen line nut. Disconnect fuel pressure gage line.
Loosen union nut.
Remove two filter base mounting nuts and flatwashers. Remove filter base.
Remove elbow, adapter, and seal from base.
Remove elbow and seal from base.
Remove connector and seal from base.
d. Base Installation
Install seal and connector.
Install seal and elbow.
Install seal, adapter, and elbow.
Install fuel filter base, alining connector with union nut.
Install two flatwashers and mounting nuts.
Tighten union nut.
Install fuel pressure gage line. Tighten line nut.
Install fuel line. Tighten line nut.
e. Priming Pump Installation
Clean gasket mounting surfaces.
Install gasket and pump. Install two bolts and flatwashers.
Turn on fuel supply.
4 Bleed fuel system. (See TM 10-4610-229-10.)