2-104. VALVE ADJUSTMENT (CONT)
Turn adjusting screw in or out until proper clearance is obtained.
Torque adjusting screw nut to 19-25 ft lb.
Check adjustment (subpara b).
Remove tdc screw from flywheel.
Turn crankshaft 360°. Install tdc screw in flywheel. No. 6 cylinder is now at tdc.
Intake valves for cylinders 3, 5, and 6, and exhaust valves for cylinders 2, 4, and 6 can now be adjusted.
Repeat steps 3 through 7 for remainder of valves to be adjusted.
Remove tdc screw from flywheel and install in storage location.
Install valve covers (para 2-103).
2-105. OIL PAN REPLACEMENT
This task covers:
High Pressure Pump Assembly
General Mechanic's Automotive
Tool Kit, item 10, appendix B