3-13. ROCKER ARM/PUSH ROD REPLACEMENT/REPAIR
Remove nut and screw from each rocker arm.
Remove nut and grab screw. Remove plate.
Remove latch, spring, and bolt.
Remove rocker support stud from cylinder head.
Install rocker support stud in cylinder head.
Install bolt, spring, and latch.
Install plate. Install grab screw and nut.
Install screw and nut in each rocker arm.
Install rocker arms on rocker arm support. Install two snaprings.
Install push rods. Make sure push rods are seated.
Install rocker arms. Install two washers and nuts. Torque nuts to 174-217 in. lb.
Adjust valves (para 2-36).