3-19. CONNECTING ROD REPLACEMENT/REPAIR
Remove bearings from connecting rod and cap.
Inspect parts for damage. Replace as required.
Using engine oil (MIL-L-2104), lubricate bearings, connecting rod cap, and connecting rod.
Install bearing in connecting rod and connecting rod cap.
Install connecting rod and cap on crankshaft.
Install two bolts. Torque bolts to 45-51 ft lb.
Install piston (para 3-18).
Install oil pan (para 2-37).
3-20. FLYWHEEL AND RING GEAR REPLACEMENT
This task covers:
Raw Water Pump Assembly
Tags, item 34, appendix C
General Mechanic's Automotive
Tool Kit, item 10, appendix B
Basic Field Maintenance
Automotive Maintenance and
Repair Shop Equipment, item 20,