3-31. FUEL INJECTION PUMP AND GOVERNOR REPLACEMENT/REPAIR (CONT)
Install flatwasher on banjo bolt. Install banjo bolt through fuel line end. Install second flatwasher.
Torque line nut to 15-18 ft lb.
Install fuel delivery lines (para 2-58).
Install fuel pump (para 2-45).
Adjust start of delivery (subpara c).
c. Start of Delivery Adjustment
Disconnect battery (para 2-16).
Remove valve cover (para 2-61).
Viewing engine from front, rotate crankshaft right until intake valve is fully open.
Using valve cover screw, connect tdc tool to rocker arm bracket. Aline screw on tool over intake valve. Tighten
valve cover screw.
Tighten tdc tool screw until it bottoms on tool.