3-77. CAMSHAFT REPLACEMENT (CON )
Apply clean engine oil (MIL-L-2104) to camshaft lobes and Journals.
Carefully install camshaft in cylinder block.
Install retainer and four bolts.
Idler gear must be installed with V mark on idler gear in alinement with B mark on crankshaft gear.
The K marks of camshaft gear can be seen at outer edges of idler gear.
Aline timing marks. Install idler gear, plate, and four bolts.
Install valve lifters (para 3-63).
Install timing gear cover (para 3-68).
3-78. CYLINDER BLOCK REPLACEMENT
This task covers:
Cleaning and Inspection
General Mechanic's Automotive
Tool Kit, item 10, appendix B
Common No. 1 Organizational
Oil cooler removed.
Engine water pump
Maintenance and Repair' Shop
Equipment, item 11, appendix B
Fuel injection pump and
Timing gears removed.
Solvent, item 33, appendix C
3-63 Valve lifters removed.
3-77 Camshaft and bearings
Para Condition Description
Engine and supports
2-98 Coolant expansion tank