TM 10-4610-229-24
2-18. INSTRUMENT PANEL REPAIR (CONT)
10
Connect battery (para 2-16).
f.
Relay Switch/Fuse Replacement
1
Remove four nuts, lockwashers, bolts, and flatwashers. Remove instrument panel from mounting bracket.
NOTE
Perform steps 2 and 7 only when replacing fuse.
2
Remove fuse from relay switch. If replacing fuse only, go to step 7.
3
Remove boot, nut, starwasher, and nameplate. Pull switch from rear of panel.
WARNING
To prevent electric shock, make sure battery is disconnected.
4
Tag and remove four wires. Remove switch.
5
Install switch. Install nameplate, starwasher, nut, and boot.
6
Connect wires and remove tags.
7
Install fuse in relay switch as required.
2-54