2-18. INSTRUMENT PANEL REPAIR (CONT)
Oil Pressure Gage Replacement
Remove four nuts, lockwashers, bolts, and flatwashers. Remove instrument panel from mounting bracket.
To prevent electric shock, make sure battery is disconnected.
Tag and disconnect wire.
Unscrew line nut. Disconnect oil pressure tube.
Remove two nuts, lockwashers, and retaining bracket.
Remove oil pressure gage from front of instrument panel. Remove elbow.
Install elbow. Install oil pressure gage.
Install retaining bracket, two lockwashers, and nuts.
Install oil pressure tube. Tighten line nut.
Connect wire and remove tag.
Aline holes on instrument panel and mounting bracket. Install four flatwashers, bolts, lockwashers, and nuts.
Connect battery (para 2-16).