TM 10-4610-232-12
(g)
Open throttle to obtain 60 Hz.
(h)
Adjust voltage to 440 VAC.
(i)
Turn generator circuit breaker toggle switch to ON.
(j)
Check that main control panel SYSTEM MODE switch (3) is in SYSTEM ON.
(k)
Turn main control panel MAIN CIRCUIT BREAKER (2) to ON. PANEL ENERGIZED light (28) must be lit, if not
pull out EMERGENCY STOP (29) (Figure 2-34).
(I)
Push SYSTEM RESET pushbutton (4) (Figure 2-33).
(m)
Turn on lights with pushbutton (5).
(n)
Open fan shutter and turn on vent fan with on/off switch (6).
(2)
Prepare air system (Figure 2-34).
Figure 2-34. Ready Air System
2-66 Change 12