TM 10-4610-232-12
3-16. REPLACE INTERIOR LIGHT BULBS. This task covers:
a. Removal.
b. Installation.
INITIAL SETUP.
Materials/Parts:
General Safety Instructions:
100 watt light bulb (Appx E, Sec II, Item 48)
Observe specific Warning in the text.
Equipment Condition:
ROWPU in normal operation or shutdown to
standby (para. 2-18).
REMOVAL.
WARNING
A light bulb or bulb guard that has been on can be hot. Use a glove or suitable cloth
when performing maintenance to avoid getting burned.
a. Use step stool if needed.
b. Unscrew light bulb guard (1, Figure 3-6),
c. Grasp defective bulb (2) and turn it counterclockwise to remove from base socket (3).
INSTALLATION.
a. Screw in a new bulb (2). Turn
b. Screw in light bulb guard(1).
new bulb clockwise to install into socket (3).
Figure 3-6. Replace Interior Light Bulbs
3-43