Water Purification System (Figure 1-4). This system purifies the raw water to make potable water suitable for drinking.
The components of the Water Purification System are contained in the ISO container (van) (1) and the separate high
pressure pump assembly (2).
The Water Purification System consists of the following major components and appropriate piping and valves, monitoring
devices, and semi-automatic controls.
Feed Water Booster Pump (3). Pressurizes water from the raw water system as needed for the filtration processes.
It is a 115 gpm (435 lpm) pump and requires 35-40 psig (241-276 kPa) to operate.
Basket Strainer (4). Removes remaining large particles in the water to prevent clogging of the internal distributors of
the media filter.
Figure 1-4. Major Components of the Water Purification System (Sheet 1 of 4)
(MODEL WTA-060 ONLY)
1-6 Change 12