TM 10-4610-232-12
Figure 4-36. Junction Box No. 3
a. Refer to Figure 4-36 and install plate (22). Secure with capscrews (21).
b. Install rail (20) and secure with capscrews(18) and Iockwashers (19).
c. Refer to para. 4-10 and assemble terminal board (11 ) by installing fourteen terminal strips (15), end plate (14),
retainer (13) and secure with screw (12). Install jumpers(16) being sure to place them as shown and replace markers
(17) if removed.
d. Place gasket(10) on cable harness (6) and install harness(6) in enclosure (23). Secure with capscrews (7), nuts(8)
and Iockwashers (9).
e. Connect wires to terminal board (11) as tagged (para, 4-10). Refer to Table 4-4 for wire connections, if tags were
lost.
f. Place gasket (5) on cable harness(1) and install harness(1) in enclosure (23). Secure with capscrews (2), nuts (3)
and Iockwashers (4).
g. Connect wires to terminal board(19, Figure 4-35) as tagged (para. 4-10). Refer to Table 4-4 for wire connections if
tags were lost.
4-148