Winter Kit (Figure 1-6). Contains items required to prevent freezing of water during cold weather operation. Items 1 thru 6 are
stored in a winter kit storage box when not in use. The covers (8 and 9) and skids (10 and 11) are stored on the table to the
left of the main control panel under the spare cartridge filter elements
Figure 1-6. Winter Kit Components
Intake Strainer(l). Use with ice holes.
Distribution Pump Heat Lamp (2). With 55 ft (17 m) of permanently attached cable.
Raw Water Pump Heat Lamp (3). With 110 ft (34 m) of permanently attached cable.
Extension Cord (4). This 110 ft (34 m) cable is used if the cable on item 3 above does not reach the heater outlet on the
Electrical Harness (5). Used to connect one of the vans diesel heaters to the generator battery to provide power for the
heater during transport and when power to the ROWPU is off.
Raw Water Pump Drain Hose (6).
Distribution Pump Drain Hose (7).
Distribution Pump Cover (8).
Raw Water Pump Cover (9).
Distribution Pump Skid (10).
Raw Water Pump Skid (11).