TM 10-4610-240-24
TM 08580C-24/2
TO 40W4-13-22
2-74.
BELT GUARD MAINTENANCE.
This task consists of:
a. Removal
b. Installation
INITIAL SET-UP:
Tools Required
General Mechanics Tool Kit (Appendix B, Section III, Item 4)
Materials Required
Lockwasher (4) - MS35338-138
Lockwasher (6) - MS35338-139
Equipment Condition
Reference
ROWPU shutdown (TM 104610-240-10).
Power shutdown (power source manual).
REMOVAL
a.
b.
Remove belt guard (1) from belt shroud (4).
c.
Remove six nuts (5), lockwashers (6), and flat washers (7).
d.
Remove belt shroud (4) from frame (8).
INSTALLATION
a.
Position belt shroud (4) on frame (8).
b.
Install six flat washers (7), lockwashers (6), and nuts (5).
c.
Position belt guard (1) on belt shroud (4).
d.
Install four lockwashers (3) and screws (2).
2-264