2-78. TIMER MAINTENANCE continued.
Position bracket (13) in timer (1) and install two net washers (10), lockwashers (11), and screws
Connect eight flexible tubes (8) to stager (7).
Be sure tubes are connected as tagged during
Install electrical cable (5) through sealing grip (4) and into timer ( 1 )
Connect electrical cable (5) to terminal board (3)
Tighten sealing grip (4).
Connect electrical cable (5) to electrical cable (6)
Close cover (14) and fasten six latches (2).
Operate ROWPU (TM 10-4610-240-10). Check for correct operation and inspect for leaks.