JUNCTION BOX ASSEMBLY MAINTENANCE - continued.
There are seven electrical covers on Model WPES-1 and WPES-3 junction boxes and eight on Model
WPES-2 One electrical cover is shown, the others are similar.
a. Install electrical cover (10) and screw (9) on connector (8).
b. From inside junction box (1), install flat washer (7), lockwasher (6), and nut (5).
There are five information plates mounted on the junction box. One information plate is shown, the
others are similar.
c. Position information plate (2) on junction box (1).
d. Install two rivets (3).
e. Close cover assembly (4) on junction box (1).