WIRING HARNESS (TRAILER) MAINTENANCE (MODEL WPES-1) - continued.
To prevent damage to wiring harness connectors, use care when pushing harness through holes in trailer
Install grommets (3) on wiring harness.
Working from rear of trailer frame (1) to front, insert wiring harness (2) through holes in frame.
There are 11 grommets on the wiring harness. All are installed the same One is shown, the others are
Install grommets (3) into holes in trailer frame (1).
There are eight clamps holding wiring harness to trailer frame All are installed the same. One is shown,
the others are similar.
Position clamps (14) on wiring harness (2) and install nuts (13).
Position connector clips (12 and 15) on trailer frame (1) and install four nuts (11).
Position connector clips (5 and 6) on trailer frame (1) and install four screws (7) and nuts (4).
Install clamp (9), screw (10), and nut (8) on wiring harness (2).