WIRING HARNESS W1 MAINTENANCE - continued.
Refer to wiring diagram in Appendix F for wiring harness or cable assembly being
When crimping, be sure to make a good electrical connection between terminal lugs and
Cut a new length of wire the same size as faulty wire.
Using crimping tool, crimp new terminal lugs (11) to wires.
For wires attached to a female multipin connector do step c.
For wires attached to a male multipin connector, go to step d.
Slide insulator bushing (2) and coupling (6) over terminals (7) and wires (1).
Screw coupling (6) to shell (8).
Tighten screws (3) securing clamp (5) to wiring harness (4).