JUNCTION BOX ASSEMBLY MAINTENANCE - continued.
High voltages in this equipment can cause serious injury or death. Be
certain that all power is removed before performing maintenance.
Remove two nuts (6), lockwashers (5), and screws (4). Discard lockwashers.
Remove utility receptacle cover (16) and gasket (15) from electrical junction box assembly (13).
Remove four nuts (9), lockwashers (10), flat washers (11), and screws (14). Discard lockwashers.
Tag wires before removal.
At back of utility receptacle (12), remove three screws (8) and three wires (7) from terminal board (1).
Remove utility receptacle (8).