TM 10-4610-241-10
TO 40W4-13-41
2-7. ROWPU ASSEMBLY AND PREPARATION FOR USE - cont.
m.
Position operational equipment as shown in figure 2-34.
NOTE
Pumps must not be placed so far from the unit that their power cables will not reach the control
panel.
CAUTION
Avoid kinking or excessive looping of hoses.
Figure 2-34. Typical Field Installation.
1.
Raw water strainer and float
12.
Backwash water tank
2.
Up to three 1 1/2-inch suction hoses
13.
1 1/2-inch fabric brine discharge hose
3.
Raw water pump No. 1
14.
1 1/2-inch suction hose/1 1/2-inch discharge
4.
One 1 1/2-inch canvas discharge hose
15.
Product water tank
5.
Raw water pump No. 2
16.
Product 1 1/2-inch suction hose
6.
Two 1 1/2-inch canvas discharge hoses
17.
Product water tank
7.
2-inch canvas Backwash discharge hose
18.
Product water 1 1/2-inch suction hose
8.
Backwash pump
19.
Distribution pump
9.
2-inch Backwash suction hose
20.
Product water 1 1/2-inch canvas discharge hose
10.
2-inch fabric Waste water discharge hose
21.
Distribution nozzle
11.
2-inch Vent Vessels suction hose
2-61