3-5. CARTRIDGE FILTER TUBE REPLACEMENT - cont.
Ensure all filter tubes are properly seated and filter cover is properly alined before tightening
Position filter cover (3) and attached parts on shell (8) and aline marks made during removal. Make sure
cartridge seats (4) aline with filter tubes (5).
To ensure proper seal between cap and shell, eyebolts must be tightened evenly.
Rotate eyebolts (7) into notches on cover (3) and alternately hand tighten in the sequence shown.
Connect hose (1) to coupling (2) on filter cover (3).
Zip access hole in top of canvas cover.
Operate ROWPU (para. 2-9) and check for leaks.
Figure 3-6. Cartridge Filter Tube Replacement.