2-76
TM 10-4610-241-24
TO 40W4-13-42
b.
Replace Cargo Tie Rings.
(1)
(2)
NOTE
There are four cargo tie rings located on the upper part of the ROWPU
frame and eight on the lower part of the frame (two on each side and
two each at front and rear). The following procedures describe
replacement of one typical upper and lower cargo tie ring.
Removal.
(a)
Remove two screws (1) and plate (2) from frame (4).
(b)
Remove upper cargo tie ring (3) from frame (4).
(c)
Remove lower cargo tie ring (5) from plate (8).
(d)
Remove two screws (6), two
lockwashers (7) and plate
(8) from frame (4).
Installation.
(a)
(b)
(c)
(d)
Install plate (8), two
lockwashers (7) and two
screws (6) on frame (4).
Install lower cargo tie ring
(5).
Install upper cargo tie ring
(3) in frame (4).
Install plate (2) and two
screws (1) on frame (4).
2-299