TM 10-4610-241-24
TO 40W4-13-42
3-44.1
HIGH PRESSURE PUMP (R.O. PUMP) REPAIR (MODELS H-9518-1, H-9518-2, AND
H-9518-3) - continued.
(11)
Place nine small o-rings (59) and one large o-ring (58) into the grooves on the body assembly (60).
(12)
Place three o-rings (54, 55, and 56) into the grooves on the underside of the manifold assembly (53).
(13)
Place the valve housing (57) under the manifold assembly (53). Align marks and ensure that the o-rings are
not pinched.
(14)
Install center bolt (47) lo&washer (48) and flatwasher (49) through manifold assembly (53) and secure the
valve housing (57).
(15)
Install the manifold assembly (53) and valve housing (57) onto the top of the body assembly (60). Align
marks.
(16)
Install seven bolts (50), lockwashers (51), and flatwashers (52). Screw into bearing plate assembly (67).
Tighten and make sure that all marks are aligned and no o-rings are pinched.
Change 1 3-254.7