WIRING HARNESS, W REPAIR.-continued.
Clean wiring harness with a damp rag.
Inspect wiring harness in accordance with TM 43-0158/TO 1-1A-15 (Air Force).
Test wiring harness for continuity and shorts, using table on previous page as a guide.
Replace all damaged and unserviceable components.
Repair wiring harness in accordance with TM 43-0158/TO 1-1A-15 (Air Force).
Position wiring harness (9) in control box and connect wires (7) to switches, terminal boards (8) and indicator
lights in accordance with information stamped on wires. Secure with screws (6)
Install clamps (4) with screws (2), lockwashers (3) and nuts (1).
Install tiedown straps (5) as required to secure harness to existing wiring.