WIRING HARNESS, W58 REPAIR.
This task consists of:
General Mechanics Tool Kit (Appendix B, Section III, Item 4)
Multimeter (Appendix B, Section III, Item 3)
Refer to TM 43-0158/TO 1-1A-15 (Air Force) for Tools required to repair Wiring Harness.
Lockwashers (IM 10-4610-241-24P)
Tiedown Straps (TM 10-4610-241-24P)
Refer to TM 43-0158/TO 1-1A-15 (Air Force) for materials/parts required to repair Wiring
Control Box removed from ROWPU (Paragraph 3-49)
Remove nuts (1), screws (2), lockwashers (3), clamps (4) and tiedown straps (5), securing wiring harness (9)
to junction box (10) and other wiring.
Remove screws (6) and disconnect wires (7) from terminal boards (8), switches and lights injunction box. See
table, on next page for connection points.
Remove wiring harness (9) from control box (10).