TM 10-4610-246-13
4.16
MAINTENANCE OF INLET PIPE ASSEMBLY
This task covers:
a.
Removal
c.
Service
e.
Assembly
b.
Disassembly
d.
Repair
f.
Installation
INITIAL SETUP
Tools
Equipment Conditions
Tool Kit, General Mechanics
Hypochlorination unit is shut down (para. 2.9).
(Item 1, App. B)
Parts/Materials
Tape, Anti-seize
(Item 8, App. E)
Soap (Item 10, App. E)
a.
Disassembly.
(1)
Remove ball valve and strainer as
follows:
(a)
Disconnect inlet pipe assembly
from
manifold
assembly
by
removing two hose clamps (1,
Figure 4-1) and non-metallic hose
(2).
(b)
Remove
ball
valve
(3)
by
unscrewing straight adapter (4)
and pipe elbow (5). Remove ball
valve (3) and straight pipe adapter
(6).
(c)
Remove
strainer
(7)
by
unscrewing
pipe
elbow
(8).
Remove strainer (7) and straight
adapter (9) from reducing tee (10).
(d)
Remove straight adaptor (11) from
manifold (12).
4-8