TM 10-4610-246-13
4.20
MAINTENANCE OF RATIO-FEEDER ASSEMBLY - (Cont)
(2) Remove screw (2) from dial cover (3) and
remove cover.
(3) Carefully lift out numbered dial (4) and
reposition it in dial holder (5) with number
0 at top.
(4) Make sure teeth on edge of numbered
dial (4) mesh with teeth of spline gear (6).
(5) Replace dial cover (3) so that line in
window lines up with mark at number 0.
(6) Install screw (2) in dial cover (3).
4-19
Figure 4-10. Dial Scale Adjustment