TM 3-4230-218-12&P
(4) Slide strap (6) and tag (5) on pump assembly (7). Con-
nect ball pump assembly to filter (8) and lid (4). Make sure
arrow on ball pump points in direction of fuel flow.
(5) Install gasket (3) and hose (2) on lid (4).
(6) Connect strainer (1) to hose (2).
4-17. BURNER.
Engine Fuel System, Disassembly/ Assembly.
This task consists of:
a.
Repair
INITIAL SETUP:
Tools Required:
Tool Kit, General Mechanics
Socket Set, Metric
Tool Kit from Accessory Box
Wrench Set, Combination
Materials Required:
Brush, Varnish (item 1, Appendix E).
Cleaning Solvent (item 3, Appendix E).
Cheesecloth (item 2, Appendix E).
Paper, Abrasive (item 6, Appendix E).
Equipment Conditions:
Engine and heat exchanger shutdown and cool.
4-29