4-17.
TM 3-4230-218-12&P
f.
Installation.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
Install igniter (5), two washers (4), and two screws (3). To
connect igniter wires to control panel refer to page 4-35.
Connect white wire to No. 7 terminal and the green/yellow wire
to No. 12 terminal of terminal strip.
Position burner (8) on heat exchanger (15).
Install eight washers (14), eight lockwashers (13), and eight
screws (12).
Connect burner choke cable (6) to burner (8).
Secure burner choke cable (6) to burner (8) with bolt (7).
Connect ignition wire (9) to spark plug (10).
Connect fuel lines (1 and 2).
Burner, Installation.
4-34
