Front Panel Removal/Installation.
To remove igniter, photocell or high and low temperature thermostats, it will
be necessary to firt gain access to back of panel
Remove four bolts (2), washers (3],
This is done as fol-
and washers (4) from
Carefully ease panel (1) away from control panel (5) thereby
exposing the terminal strip.
Disconnect only those wires necessary to remove component.
Upon installation of new component, and attachment to terminal
strips, install spot ties as required.
Reposition panel (1) and secure with bolts (2), washers (3),
and washers (4).