Burner Choke Control.
(a) Remove two bolts (8), two washers (6), and lever (2) from
It may be required to cut bend in lead to free cable from cable clamp.
(b) Loosen bolt (11) on cable clamp (3) and unscrew choke
cable (4) outer casing from lever (2).
(c) Loosen bolt (11) and disconnect lead (4) from burner
choke arm (9).
Pull lead from unit.
Choke Control, Removal.
The cleaning solvent used emits strong vapors and is flammable.
illness or fire, use in a well-ventilated area and away from open flames. DO
NOT breathe vapors for a prolonged time.
(a) Wash burner lever (2) and cable parts in cleaning solvent
(item 3, Appendix E) using a varnish brush (item 1,
(b) Allow to dry.