PREPARATION FOR STORAGE OR SHIPMENT
4-36. PREPARATION FOR LONG TERM STORAGE OR SHIPMENT.
Security of the unit will be maintained in accordance with AR 190-13.
Administrative Storage will be in
Under tropic conditions the unit
salt spray can cause corrosion.
accordance with TM 740-90-1.
must be stored indoors.
Drain water from all components and allow to dry.
Remove fuel pump belt and water pump drive belts.
Place all belts
in tool box (13).
Drain all fuel lines and fuel containers.
Be sure to powder ( item 12, Appendix E) the tank before placing in container.
Place water tank into shipping container.
Remove shipping restraints and attaching hardware from pouch.
Place pouch in-accessory kit.
Place water tank container, accessory case, and two fuel
on skid and band securely.
Using tape (item 13, Appendix E), cover heat exchanger
(12), water inlet (7), carburetor filter (8), water outlet
Place decontamination unit on skid.
(2), and air
Install lower engine restraints (4 and 3) into position and secure
with two washers (5) and two bolts (6).
Install upper engine restraints (1) and secure with two bolts (9).
Install four clamps (14) to secure
Place tool kit in tool box.
If unit is to be shipped or stored
over both skids.
decontamination unit to skid.
overseas, install shipping crates