DECONTAMINATING APPARATUS - Continued.
Water Inlet Assembly - Continued.
(4) Installation - Continued.
(h) Install WATER PRESS REGULATOR handle (6) into position
and secure with two setscrews (7).
(i) Connect hose (5) to water inlet check valve (8).
(j) Position inlet panel (4) and secure with four washers (3),
four lockwashers (2), and four screws (1).
(k) Install and adjust drive belts (TM 3-4230-218-12&P). Make
sure belts do not rub on unit.
(l) Install burner fuel pump belt (TM 3-4230-218-12&P).
Water Pump and Fuel Pump Belt Tensioner.
(a) Remove nut (2), bolt (4), washer (3), and spring (5)
from bracket (13).
(b) Remove two bolts (8), two lockwashers (7), and two
(c) Remove bracket (13) from fan housing (1).