2-5. DECONTAMINATING APPARATUS - Continued.
Water Pump and Fuel Pump Belt Tensioner - Continued.
(a) Inspect all hardware for stripped threads. Replace stripped
(b) Inspect spring for stretched or broken coils. Replace
stretched or broken springs.
(c) Inspect mounting bracket for cracks, deformed mounting
holes, bent spindle, stripped threads, and rust/corrosion.
(d) Inspect bearing for binding. Replace if bearings bind.
Install tensioner bracket (9), two washers (12), two lock-
washers (11), and two bolts (10).
Install bracket (13) to fan shroud (1) and secure with two
washers (6), two lockwashers (7), and two bolts (8).
Install spring (5), washer (3), bolt (4), and nut (2) to
Install burner fuel pump belt.
Install and adjust drive belts (TM 3-4230-218-12&P).