TM 3-4230-218-30&P
2-15.
FRAME - Continued.
d.
Repair - Continued.
(2) Replacement of support brackets and panels.
(3) Straightening of all bent frame members.
e.
Assembly.
CAUTION
The engine mounts are not identical. Failure to install proper mounts into
proper location will result in equipment damage.
(1) Install two (soft ) front mounts (19) into position and secure
with four washers (10), and four bolts (11).
(2) Install two (hard) rear mounts (9). into position and secure with
four washers (10) and four bolts (11).
(3) Install housing (18), four nuts (8), four washers (7), four
bolts (20), and four washers (6).
(4) Install angle (17), two washers (16), two lockwashers (15), and
two bolts (14).
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
Install
(12).
Install
(1).
Install
Install
Install
Install
Install
Install
panel (13) and secure with four quick-release fasteners
handle (3), washer (4), bolt (5), washer (2), and nut
tool box and fuel hoses (TM 3-4230-218-12&P).
inlet (TM 3-4230-218-12&P).
water outlet assembly (TM 3-4230-218-12&P).
control panel (page 2-75).
heat exchanger (page 2-50).
engine and fan assembly (page 2-24).
2-78
