DECKMASTER
3.0
STRUCTURAL SYSTEM
The Drinking Water Discharge Winch System components, winch, levelwind, and hydraulic power package have
been designed and constructed based on operating characteristics and space limitations.
3.1
Winch
The general winch configuration is presented in Figures 3-1, 3-2, and 3-3. Details of the drum are shown in
Figure 3-4. Except for specialty components, e.g., shafts, gears, and bolts. The material used for the construction of the
winch were:
ASTM A-36 steel:
Plates, angles, channels, and
I-beams
ASTM A500-B steel:
Rectangular tubing
3.2
Levelwind
The Levelwind structural members are ASTM A-36 steel. The traveler head rollers or NYLATRON GSM, and the
roller shafts are 316 stainless steel. Fastening hardware are all stainless steel.
3.3
Hydraulic Power Package
The foundation for the Hydraulic Power Package as shown in Figure 3-5, was fabricated from ASTM A-36 steel.
The 2" x 2" square tubing was ASTM - A500-B steel.
3-1