h. Gate valve
The William Powell Co.
4 in. nominal
Corrosion resistant steel
i. Control station (winch hydraulic power unit remote control switch)
Square D Co.
Bell Electrical Products Div.
j. Shore winch
Government furnished equipment
1-12 Items furnished
1-12.1 Components installed as part of the drinking water shore discharge system are listed on the parts list of the
drawings in Appendix B and in the Components of End Item List in TM 55-1930-209-14&P-20.
1-12.2 Common and bulk items onboard are listed in the Expendable Supplies and- Materials List in TM 55-1930-209-
1-12.3 Repair parts and special tools onboard are listed in the Repair Parts and Special Tools List in TM 55-1930-209-
1-13 Items required but not furnished . During barge deployment, an LCM-8, or similar type vessel with equal
capability, is required to transport the shore winch (weighing 5.5 tons) from barge to shore facility. This type vessel or
one of equal capability is required again to retrieve the winch from shore and load it on the barge for transport to the next
site. A 50K (RTFL) Rough Terrain Forklift is also required for loading and unloading the winch from the LCM-8.
1-14 Tools and test equipment. A repair kit, Coflexip part No. 830426-4, is provided for repairing the discharge
hose. This kit contains the following:
Hot air gun w/air supply unit
1-14.1.Consumable 1/2 inch plus stainless steel bands with clamps and wrench are also included in the kit.
1-14.2 For other maintenance, use existing tools and equipment onboard. A complete list of tools and test equipment
onboard is in the Tools and Test Equipment List in TM 55-1930-209-14&P-18.