MAF Design Features
New standard for compactness and light weight relative to power output, increases installation design
Displacements range from 20 cubic inches 1328 CM3) down to 3 cubic inches (49 CM3) per
Continuous rated pressure up to 1750 psi (120.7 BAR), depending on displacement with fully
competitive volumetric efficiency.
Patented roller vanes for high performance and durability.
Commutation radically independent of load induced shaft movement, minimizing wear induced
Coupling shaft mounted in steel caged needle radial and thrust bearings to withstand higher side and
Optimized drive link contact with 8 tooth spline drive to reduce wear.
Unique high pressure shaft seal allows MAF Torqmotors to be run in series without need for case
drains. Only simple direct-line circuitry required.
Standard SAE porting and mounting configurations.
Fewer parts reduced maintenance, while maintaining quality performance.