Tips for Maintaining the TorqmotorTM
Adjust fluid level in reservoir as necessary.
Encourage all operators to report any malfunction or accident that may have
damaged the hydraulic system or component.
Do not attempt to weld any broken TorqmotorTM component. Replace the
component with original equipment only.
Do not cold straighten, hot straighten, or bend any TorqmotorTM part.
Prevent dirt or other foreign matter from entering the hydraulic system.
Clean the area around and the filler caps before checking oil level.
Investigate and correct any external leak in the hydraulic system, no matter
how minor the leak.
Comply with manufacturer's specifications for cleaning or replacing the filter.
Cautions required for Proper TorqmotorTM Hydraulic System Operation
Do not weld, braze, solder or any way alter any TorqmotorTM
Maximum operating pressure must not exceed recommended
TorqmotorTM pressure capacity.
Always carefully inspect any system component that may
have been struck or damaged during operation or in an
accident. Replace any component that is damaged or that is
Do not force any coupling onto the TorqmotorTM coupling shaft
as this could damage the unit internally.
assistance. If problems occur which you cannot solve, please
contact our Ross Service Department or local Ross approved
Distributor. Our phone number and telex number and address
are on the back cover of this manual.