Fuel System - Sleeve Metering
Final Fuel Filters
Remove and discard the filter (right hand thread).
Lubricate the gasket of the new filter with clean fuel.
Do not pour fuel into the new filter element before
installing. Prime the system as instructed in the
topic, "To Prime the Fuel System."
Stop the engine.
Shut off the fuel tank supply valve.
Loosen the nut (1) on the filter cover and lower the
filter case (3).
Remove the element (2). Wash the cover and
element in clean nonflammable solvent.
Reinstall the element.
Clean the gasket sealing surface of the filter base.
Be sure all of old gasket is removed.
Install the filter and tighten it by hand until gasket
contacts base, then tighten 1/2 to 3/4 turn more.
Prime the fuel system.