Disassembly and Assembly
Electric Starting Motor
Remove And Install Electric Starting Motor 1453 -010
Put identification marks on the wires for the starting
motor as to their location on the starting motor.
Disconnect all wires (3) from the starting motor.
Use two persons to remove the starting motor. The
weight of the starting motor is 29 kg (64 lb.). Remove
three bolts (1) and starting motor (2) from the flywheel
housing. Check the condition of the gasket for the
starting motor. If necessary, make a replacement.
Put the gasket and starting motor (2) in position on
the flywheel housing, and install bolts (1) to hold It.
Connect all wires (3) to the starting motor.
Remove Alternator 1405-011
Put identification marks on all wires (1) for the
alternator. Disconnect the wires from the alternator.
Loosen bolts (3) and (4) and remove belt (5).
Remove bolts (3), (4) and alternator (2) from the